EV charger installation: what the regulations require
An electric vehicle (EV) charger is a fixed installation, so it must meet the wiring regulations, BS 7671, like any other circuit. The rules that apply specifically to charging installations are in Section 722 of BS 7671. This article is a study overview of the main points, not a replacement for the standard or for the judgement of a qualified installer.
What Section 722 covers
Section 722 sets out additional requirements for installations that supply electric vehicles, including the supply, the cable route and the protection. The standard is amended from time to time, so check the current edition for the exact wording and check which version your course is based on.
Protection
- Each charging circuit needs overcurrent protection, normally a suitably rated circuit breaker.
- Charging circuits also need residual current protection under Section 722.
- Check the charger instructions. Some chargers include DC fault detection, which can change the type of RCD needed.
Cable and supply checks
- Size the cable for the charger rating and the installation method, not only for the breaker.
- Check the earthing arrangement, such as TN-C-S or TT, and that the supply can take the charger load alongside the existing loads.
- Use equipment with a suitable IP rating where the charger or cable is outdoors.
Notification and certification
In England and Wales, a new circuit for a home charger at a dwelling is normally notifiable work under Part P of the Building Regulations. It can be notified to building control, or carried out by an installer registered with a competent person scheme. Scotland and Northern Ireland have separate rules. On completion, the work should be certified with an Electrical Installation Certificate and inspection and test results.
Studying this topic
Charger installation sits within the wider wiring regulations. If you are studying for the 18th Edition exam, read the Electrical Wiring guide, check your understanding with the Electrical Wiring sample test, then use the iPassPro Electrical Wiring practice test app for full coverage.
This article is a study overview only. Always follow the charger manufacturer instructions, BS 7671 and local building regulations, and use a qualified installer for the work.